Fra-Ber Neve Foaming Shampoo 1L

We recommend using Neve as a foam shampoo for washing.

Main steps:

1. Spray the foam over the entire vehicle, starting from the bottom and applying the product horizontally, gradually moving upwards. This will prevent dripping during rinsing.
2. Then rinse with plenty of high-pressure water. Move in a horizontal direction from the top part of the vehicle, gradually moving downwards.

If applied with a foam gun and foam lance: dilute to a ratio between 1:2 and 1:12, i.e., use between 330 ml and 75 ml of product and top up with water (between 670 ml and 925 ml) to obtain a 1 L ready-to-use solution. During application, the actual dilution ratio may reach between roughly 1:45 and 1:195.

If applied with a pre-pressure pump or bucket: use a dilution of 1:25 to 1:50, that is, use 40 ml to 20 ml of product and fill the remainder with water (960 ml to 980 ml) to make a 1 L solution ready for use. The dilution can go up to 1:500 for frequent washing.

If used as a pre-wash detergent for weekly cleaning: use a foam gun or foam lance with a dilution ratio between pure and 1:19, i.e., use up to 50 ml of product and top up with water (950 ml) to obtain a 1 L ready-to-use solution. During application, the actual dilution ratio may reach between roughly 1:15 and 1:300.

For professional use in car washes:

• Pump: 10-40 pumpings 6 l/h pump capacity 5-40 ml consumption per cycle;
• Dosatron: 0.2-2%;
• Sprayer: 1:50 to 1:500;
• Foam lance: dilute to a ratio between 1:2 and 1:12, i.e., use between 330 ml and 75 ml of product and top up with water (between 670 ml and 925 ml) to obtain a 1 L ready-to-use solution. During application, the actual dilution ratio may reach between roughly 1:45 and 1:195.