InnovaCar S3 Rinseless ( Waterless Wash ) 1L

How to wash your car without rinsing, with S3 Rinseless:

1. Dilute the product in a bucket to a ratio between 1:100 and 1:250, i.e., use between 50 ml and 20 ml of product and top up with water (between 4950 ml and 4980 ml) to obtain a 5 L ready-to-use solution.
2. Wait for the surfaces to cool.
3. Make sure to remove any bracelets or watches during this process to avoid accidentally scratching the bodywork.
4. Work on small areas at a time using a high-quality mitt.
5. Fill a graduated trigger bottle or spray dispenser with the freshly prepared solution, then spray onto the area to be treated to loosen the dirt, making sure the product doesn’t dry out.
6. If necessary, rinse with a glove or sponge previously soaked in water only.
7. Wipe dry with a clean microfiber cloth.
8. We recommend using the two-bucket method.

How to wash your car without water, with S3 Rinseless:

1. Dilute the product to a ratio of 1:100, i.e., use 10 ml of product and top up with water (910 ml) to obtain a 1 L ready-to-use solution.
2. Wait for the surfaces to cool.
3. Work on small areas at a time, applying the product on the dry or wet surface evenly.
4. Wait 15-20 seconds before removing the product, allowing the dirt to soften.
5. Fold the clean cloth into quarters to minimise the number of cloths needed for the wash.
6. Use the first side on the surface, working in one direction and lifting the cloth gradually as you wipe, to remove the dirt.
7. Finish cleaning with a clean and dry finishing cloth.
8. Clean the next area using another clean side of the previously folded cloth and repeat the process.

For rinseless cleaning: The recommended dilution ratio for the bucket method is between 1:100 and 1:250, i.e., use between 50 ml and 20 ml of product and top up with water (between 4950 ml and 4980 ml) to obtain a 5 L ready-to-use solution.

For waterless cleaning: The recommended dilution ratio is 1:100, i.e., use 10 ml of product and top up with water (910 ml) to obtain a 1 L ready-to-use solution.

Warnings: We recommend the product not be applied on hot surfaces or under direct sunlight. Do not allow the product to dry on the surface. A deposit can be found at the bottom of the bottle, typical of probiotics presence; therefore, it is recommended to shake the product before use.