InnovaCar SC6 Wet Look Tire Dressing 500ml

How to renew and restore the shiny appearance of tyres, rubber and plastic car parts with SC6 Wet Dressing:

If you want more color depth and shine, a second coat can be reapplied 15-30 min apart.

For use on tires:

1. Thoroughly prepare the tires with a prewash using 100% DEGREASING or SP1 PREWASH, helping if necessary with the TIRE BRUSH tire brush.
1. For 100% DEGREASING 500 ml size use pure;
2. For 100% DEGREASING 4.54 L size use a 1:3 dilution then use 250 ml of product and fill the remaining part with water, 750 ml, to make a 1 L ready-to-use solution;
3. For SP1 PREWASH use a dilution of 1:5 to 1:10 then use 160 ml to 90 ml of product and fill the remainder with water, 840 ml to 910 ml, to make a 1 L ready-to-use solution.
2. Perform tire decontamination and washing with SD1 IRON, helping if necessary with TIRE BRUSH tire brush;
3. Proceed with a pass of D2 CHECK with a dedicated microfiber to remove traces of previous protectants and any remaining residue;
4. Shake SC6 WET and apply a portion of the product to the MICRON APP microfiber applicator and proceed to spread the product evenly over the entire tire;
5. For durability, it is recommended to let the product absorb by removing the excess after 15-30 minutes;
6. If you want more color depth and shine, a second coat can be reapplied 15-30 min apart;
7. The product is fully activated after 2 hours.

How to brighten, regenerate and restore the shine of plastic parts, car seals, fascias, the dashboard and engine compartment:

1. Carefully prepare the surface by cleaning it thoroughly, then use D2 CHECK 1:3 on the fascias, exterior plastic parts and engine compartment, or 0 AMMONIA 1:10 on the interior plastic parts and dashboard.
1. For D2 CHECK, use 250 ml of product and top up with 750 ml of water to obtain a 1 L ready-to-use solution;
2. For 0 AMMONIA, use 90 ml of product and top up with 910 ml of product to obtain a 1 L ready-to-use solution;
2. Apply a portion of product onto the MICRON APP microfibre pad and spread the product evenly across the entire surface. In the case of gaskets, use a small brush;
3. For durability, it is recommended to let the product absorb by removing the excess after 15-30 minutes;
4. If you want more color depth and shine, a second coat can be reapplied 15-30 min apart;
5. The product is fully activated after 2 hours.

For tire maintenance:

1. Use SP1 PREWASH for a touchless prewash;
2. Proceed with a subsequent cleaning with SD1 IRON THIXO RAPID with the help of a medium hardness brush if necessary.

Precautions: Do not apply the product on the tread. Best results are achieved on well-maintained surfaces.

SAFETY INFO & TECHNICAL DATA SHEET