Fra-Ber TriFoam Blue Shampoo 4.5L

We recommend using Trifoam as a colourful foam shampoo.

Main steps:

1. Spray the foam over the entire vehicle, starting from the bottom and applying the product horizontally, gradually moving upwards. This will prevent dripping during rinsing.
2. Then rinse with plenty of high-pressure water. Move in a horizontal direction from the top part of the vehicle, gradually moving downwards.

If applied with a foam gun and foam lance: dilute to a ratio between 1:9 and 1:12, i.e., use between 100 ml and 75 ml of product and top up with water (between 900 ml and 925 ml) to obtain a 1 L ready-to-use solution. During application, the actual dilution ratio may reach between roughly 1:150 and 1:195.

If applied with a pressure spray pump: dilute to a ratio between 1:25 and 1:50, i.e., use between 40 ml and 20 ml of product and top up with water (between 960 ml and 980 ml) to obtain a 1 L ready-to-use solution.

For professional use in car washes:

• Pump: 30 gr/car;
• Sprayer / Dosatron: dilute 1-2% in water;
• Pressure washer: dilute 10–20% in water and then vacuum the solution;
• Foam lance: dilute to a ratio between 1:9 and 1:12, i.e., use between 100 ml and 75 ml of product and top up with water (between 900 ml and 925 ml) to obtain a 1 L ready-to-use solution. During application, the actual dilution ratio may reach between roughly 1:150 and 1:195;
• Rinse thoroughly.

Precautions: It is recommended not to apply on soft top/top of spider/cabrio cars.