Our Clay Pad Decontamination System works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. With either dual action orbital polisher or hand application, it safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the Clay Pad can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the Clay Pad on the ground, no problem, just rinse the sponge pad clean and you’re ready to keep using it.
*For surface prep., use with a suitable Spray Lubricant/Detail Spray.
Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface below 12°C and over 60°C. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.
- Thoroughly wash vehicle free of dust, sand, and dirt.
- Mist sufficient lubricant onto the surface.
- Polish the surface with dual action polisher using light pressure (Low Speed).
- Wipe off residue with clean dry microfiber towel.
Sufficient lubrication is crucial to the Clay Pad application.
Plain water is NOT an adequate lubricant.
DO NOT use with rotary polisher.
Remove tar & grease before application